Superpro 2000 Universal Programmer for PIC, EPROM, EEPROM, Flash & AVR

High Speed 48 Pin Stand-Alone Universal Programmer

Resources Center

Software Download
User's Guide
Device List
Adapters (Optional)

FEATURES

Ideal for Engineering, Service, or Small Volume Manufacturing
Enhanced version, SUPERPRO2000+, programs and verifies chips at almost twice the speed for large chips. Production efficiency is substantially improved when programming large size chips such as Flash devices. See programming speed comparison table (Function) for detail.
48 Pin DIP ZIF socket with universal pin-drivers. Stand alone or PC hosted Mode operating in one unit (Dual modes)
Optional universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters (Up to 48 pins)
Device insertion and poor-pin-contact check.
Auto-run mode starts programming automatically upon detection of chip insertion
Super programming speed. Programs 28F800 in less than 12 seconds and 29PL160 in less than 65 seconds (Stand-alone mode)
Low voltage operation down to 1.8 Volts.
Supports Windows XP/2000/NT/95/98/ME
Connects to a PC via printer port
8000+ devices supported (PC Mode) including E/EPROM, FLASH, Micros, PLD devices
Tests standard logic and SRAM devices

Applications:

Use 2 or more units together in stand-alone mode (without a PC attached) for small volume manufacturing operation and add more units as requirement grows
Can be operated by an operator with minimal training
For field service use. Built-in keyboard and display allows for each diagnostic, edit, and programming.
Auto engine diagnostic Power may be supplied from a 12VDC battery source such as from an automobile

IC Test:

TTL (74 series), CMOS (40/45 series) Logic IC
DRAM (4164, 41464 ...), SRAM (2114, 6116 ...) memory device

Functions:

Dual Mode Programming Operations ;
- Standalone Mode - Operates by itself to perform functions such as Copy, Edit Buffer, Read, Blank check, Erase and Test of some standard chips. Comes with internal CPU, 7 key keypad, 16x2 LCD display, and flash memory for programming data and algorithms. Standard data buffer size is 8 Mbits, which is expandable to 128 Mbits. Programming algorithms can be downloaded from the PC host via printer port, which will stay inside the memory until re flushed. Flash memory can store more than 30 algorithms at one time. The application is ideal for volume programming or field service operations. 12 volts DC power input allows for mobile operation using power from the vehicle.
- PC Mode - Operates with a PC. Connects to a parallel port of the PC. Provides full programming features such as Program, Read, Verify, Blank Check, Buffer Edit, Vector test, etc. Stream- lined file and buffer data management, chip selection and other features are provided as a standard. Programming algorithms for more than 3,000 devices are provided.
Universal Pin-Driver, Universal Adapter;
Universal pin driver architecture allows for easy update of new devices. Socket adapters also become universal as that, for example, a 44pin PLCC adapter is usable for all devices in the same package. Adapters are no longer device specific, which saves money and time.
Chip Insertion Check, Protects Chips;
Checks for proper insertion of the chip for proper programming and protection against potential damage to the chip.
Auto Programming Mode, efficient for Volume Programming;
Chip inserted is detected and identified automatically, and programming sequence begins immediately without intervention. Operation, therefore, is error free and very efficient. It is ideal for volume programming.
Fast Programming Speed (SUPERPRO/2000);
In stand-alone mode programming, 8Mbit Flash (28F800) takes only 36 seconds for full programming.
Faster Programming Speed (SUPERPRO 2000+)
When programming a volume of EPROM or Flash devices each day programming time becomes crucial. SUPERPRO/2000+ enhances speed of programming by almost two folds for large devices, thus enhancing daily throughput by up to twice.

Speed Comparison: (Time in seconds)

Type

Program

Verify

Throughput

28F320B3

169

28F800B

720

28F008

514

29F080B

389

28C64B

0.8

7578

24C256

2215

W78E58

1600

PIC12C508

0.8

7578

Concurrent Programming for volume production;
2, 3 or more units may be operated simultaneously for volume production.There are several advantages over using traditional gang programmers.
Economical - User may start with one programmer and add more units as volume grows.
Better Chip Support - All the devices supported in stand-alone mode can support gang mode, So have wider range of devices list.
Full Adapter Support - Any socket adapter available can be used for volume programming. Typical gang programmers have limit range of socket adapters available.
Faster Programming - Each chip can be inserted or removed individually while other chips are being programmed.In a typical gang programmer,chips are inserted and removed simultaneously causing dead time in between.
A programmer can be shared among users on the same network.

Application:

Stand-Alone Gang Universal Programmer for manufacturing of DVD, PDA, MODEM, Mobile Phone, POS, GPS, Monitor, GPS, Game machine, etc.
Concurrent programming for Engineering and Development.
For in-field Service not requiring a host PC for operation. Ideal for mobile use due to 12V DC input power.

Hardware & Specifications:

Power supply : Input 100V-240VAC,Output 12VDC/2Amp.
Programmer Dimension :200(L) x 140(W) x 24(H) mm
Package : 263(L) x 232(W) x 100(H ) mm
Shipping Weight : 1.8 Kg